Telephone:

+8613764158024

Products
Home > Products > Heater

Induction Spring Coil Heating Heater

induction heating coil Introduction   Hot Sale Induction Heating Coil Design features continuous operating temperatures up to 1200°F. Rapid heating and cooling occur, due to the low mass construction. All heating...

Product Details

induction heating coil

Introduction

 

Hot Sale Induction Heating Coil Design features continuous operating temperatures up to 1200°F. Rapid heating and cooling occur, due to the low mass construction. All heating elements are sealed from contamination and the stainless steel sheath provides maximum corrosion resistance. An optional internal thermocouple may be utilized for precise control.  Its high working temperature, fast heating, uniform heating precision, long service life, can be automatically controlled area, high thermal conduction, while internal heating material damage, external can be reused.

Product Description

 

Standard sheath material: …………………………….Ni-Cr steel, for temperatures up to 1500° (815°)

Standard thermocouple: ……………………………….ANSI Type J

Optional thermocouple: ………………………………..ANSI Type K

Minimum bending radius: …………………………….Three times the sheath diameter

Dimensional

Standard square cable: …………………………………0.125″ square

Standard rectangle cable: ……………………………..0.080″ x 0.140″, 0.105″ x 0.150″

Standard round cable diameters: ………………….0.093″, 0.125″, 0.150″, 0.188″, 0.200″, 0.250″, 0.312″, 0.375″ – Other dimensions available

Cable diameter tolerance: ……………………………..±0.005

Standard potting adapter: ………………………………0.281″ / 0.250″ diameter – used with heater only and heater with thermocouple leads, 20 gauge and finer  –  1/2″ – used with heater only and heater with thermocouple leads, 18 gauge to 12 gauge

Standard potting adapter length: …………………..1.0″ – Other lengths available

Standard coil I.D.: ………………………………………….From 3/8″ up to 2 1/2″ in any increments

Coil I.D. tolerances: ………………………………………3/8” to3/4”, + 0.000”, – 0.020”  – 7/8” to 1 1/4”, + 0.000”, – 0.030″  –   1 1/2” to 2 1/2”, + 0.000”, – 0.060”

Coil length: ……………………………………………………Up to 12” on 3/8” to 3/4” I.D.  –  Up to 16” on 7/8” to 1 1/4” I.D.  –  Up to 18” on 1 1/2” to 2 1/2” I.D.

Coil length tolerance: …………………………………….0 to 6”: + 0, – 1/8”  –  6 to 12”: + 1/8”, – 1/4”  –  12 to 18”: ± 1/4″

Electrical

Resistance tolerance: ……………………………………± 10%

Wattage tolerance: …………………………………………± 10%

Maximum amperage: …………………………………….Size dependent, consult factory

Standard Voltage: ………………………………………….120 or 240 volts, for higher or lower wattages contact Durex Industries

Lead Adapter Orientations

Continuous operating temperatures to 1200°F

Intermittent operating temperatures to 1500°F

Rapid heating and cooling due to low mass construction

 

Heating elements sealed from contamination

 

Stainless steel sheath for corrosion resistance

 

Optional internal thermocouple for temperature control

Hot Tags: Induction Spring Coil Heating Heater , China, manufacturers, suppliers, factory, buy, quotation

 
Online Service